She Started out as a 94 FXSTC which I purchased New ,she has gone through many changes in the years that I have had her the only thing left stock is the oil tank .I've been doing a frame up on her very exstenseve my goal is a true PRO STREET not one with a big tire you know all looks & no "Bite" , I started out with a 121 TP which I tore down and built to the hilt I started with a 40mm Dellorto that I machined my own chokes ,imulstion tubes & Jet's then I built an intake to run it on thats right 2 40mm bores into a single Plenum which is 80mm then I installed a 680 Lift Cam ,the engine is 11:1 Comp.,& a Custom Exhaust System I built & with a CUSTOM 2 stage NITROUS System I built & Tied it to a BDL Belt Drive with Slipper Clutch then to a Custom built trans with a few goodies I started out with Dekron Cases, Andrews gear's, Baker shifting fork's, Sputh Anti Overshift & Timkin Bearings. I designed my own wheels & had them cut running 240 rear on a custom swing arm I built & 90/90/21 frontdual 4 piston calipers front & rear got to stop the BEAST

. I stretched the tank put in a new tunnel cut up a rear fender & made the struts to get the look I was after ETC ETC Still needs paint.The test run was wild 1,2,3,4th gear burn outs GRANNY SHIFTING IT

.I almost want to say it will lite up Fifth gear to but will have to see !!!